Introduction
The On-Screen Display (OSD) feature allows you to display device information, such as the serial number, MAC address, Chip ID, and IP address, directly on the connected screen.
This article explains how to customize the OSD font size, text boldness, text color, and background color to improve readability across different displays.
Prerequisites
- An H200 or H200W media player running firmware version 25.8.2630.9R onwards.
- The device must be configured to receive INI settings through Orchestrate, USB, or DHCP.
- This article assumes that you understand how to edit and apply INI configuration parameters to your media player.
Summary
1. Enable OSD information
By default, the OSD feature is disabled. Before customizing the OSD appearance, make sure the feature is enabled using the following INI parameter:
browser.osd_info.enable=ON
You can also use the browser.osd_info.mask parameter to select which device information is displayed on the screen. The default bit mask is 1101, which displays the serial number, MAC address, and IP address.
To include the Chip ID, set the mask to 1111:
browser.osd_info.mask=1111The supported information includes:
- Serial Number (SN)
- MAC Address
- Chip ID
- IP Address
2. Customize the OSD appearance
You can adjust the OSD appearance using the following INI parameters.
Font size
Use browser.osd_info.font_size to change the size of the OSD text.
-
Default:
15 -
Unit: Scaled pixels (
sp) - Valid values: Positive numbers greater than zero.
For example:
browser.osd_info.font_size=30
Increasing the value enlarges the OSD text, making it easier to read on larger displays or from a greater viewing distance.
Smaller values reduce the space occupied by the overlay.
Font boldness
Use browser.osd_info.bold to enable or disable bold text.
-
Default:
Normal -
Valid values:
BoldorNormal
To enable bold text:
browser.osd_info.bold=Bold
Setting the value to Normal displays the text in its normal style. This setting applies to both OSD labels and their corresponding values.
Text color
Use browser.osd_info.argb to customize the color of the OSD text.
-
Default: White (
FFFFFFFF) -
Format: 8-digit hexadecimal ARGB (
AARRGGBB)
The color format consists of:
-
AA– Alpha (transparency) -
RR– Red -
GG– Green -
BB– Blue
For example, to display white text:
browser.osd_info.argb=FFFFFFFF
Background color
Use browser.osd_info.background_color to customize the background of the OSD information overlay.
-
Default: Transparent (
00000000) -
Format: 8-digit hexadecimal ARGB (
AARRGGBB)
For example, to set a solid black background:
browser.osd_info.background_color=FF000000
Other examples:
| Value | Result |
|---|---|
FFFFFFFF |
Fully opaque white |
FF000000 |
Fully opaque black |
00000000 |
Fully transparent |
The first two digits control the transparency. FF represents a fully opaque background, while 00 represents full transparency.
3. Configuration examples
The following examples demonstrate how to combine the OSD INI parameters to customize the OSD appearance.
Example 1: Smaller text with a transparent background
browser.osd_info.enable=ON browser.osd_info.mask=1111 browser.osd_info.font_size=10 browser.osd_info.bold=Normal browser.osd_info.background_color=00000000
This configuration uses smaller, normal-weight text with a transparent background.
It can be useful when you want the OSD to occupy less space on the display.
Example 2: Larger, bold text with a solid background
browser.osd_info.enable=ON browser.osd_info.mask=1111 browser.osd_info.argb=FFFFFFFF browser.osd_info.font_size=30 browser.osd_info.bold=Bold browser.osd_info.background_color=FF000000
This configuration displays larger, bold white text on a solid black background.
It can improve readability on large displays or when the underlying content makes the text difficult to see.
4. Apply the configuration
You can apply these settings using your existing INI provisioning method.
If you are using Amino Orchestrate:
- Navigate to Configurations and select the configuration assigned to your device.
- Open the Parameters tab and find the Advanced Parameters.
- Click Add/Remove Parameters and add the required OSD settings.
- Configure the values according to your preferred appearance.
- Click Save Changes to apply the configuration.
- Once the media player has received the updated configuration, restart the device and check the OSD appearance.
If you are using USB or DHCP provisioning, add the parameters to your existing INI configuration and apply the updated file.
5. Important notes
- Invalid values: Invalid font sizes revert to the default font size. Invalid or missing text and background color values revert to their respective defaults.
- Screen orientation: The OSD supports both portrait and landscape displays.
- Text alignment: Labels and values remain aligned when larger font sizes or bold text are used.
- Positioning: The OSD is kept within the screen boundaries, including when random positioning is configured.
- Touch interaction: The overlay is sized to its displayed content, allowing touch interactions outside the OSD area to reach the underlying application.
- Configuration persistence: OSD styling settings are retained across device restarts.
References
- H200 Quick Start Guide – Device provisioning and setup methods.
- Channel Zapper User's Guide – See the "Watermark / On Screen Display of Device Info" section for more information on existing OSD settings.