Introduction
This article outlines the use of the supported 3.5mm RCA cable to output analog signal on an Amino supported device.
- Official Amino 3.5mm cable information
- Technical Specifications
Prerequisites
Use of official Amino 3.5mm to 3 RCA Cable (Part Number: 99-970514-00)
For Amino STBs with 3.5mm jack socket. Terminates in 3 RCA for CVBS and Audio L/R. 1.8m cable length.
Summary
Technical Specification:
1. Analog Audio Output
The audio DAC is used to provide the analog audio L+R output. The typical output level is in the range of 2Vrms. The output will be routed to the 3.5mm TSSR A/V jack together with analog video outputs.
2. Analog Video Output (CVBS)
The video DAC uses high-speed CMOS DAC technology. The CVBS + Audio L/R signals are routed out on the PCBA to the 3.5mm TSSR A/V jack.
The CVBS output is disabled when HDMI output is connected to TV set and activated when the HDMI output is disconnected.
Pin Assignment of 3.5mm TSSR analog A/V plug for H200:
Note: This is not the same as many generic connectors which appear similar so if in doubt, order the official Amino 3.5mm cable product code: 99-970514-00.
References
None